50kN capacity CBR to perform in-situ CBR test. The mechnical jack is made form aluminium alloy. Houses the worm and wheel. The in-situ CBR consists of 50kN two mechanical jack, ball head attachment, adjustable CBR penetration piston, set of extension rod ( 2 x 102mm long, 1 x 305mm long, 1 x 610mm long, 1 x 915mm ong, 2 adaptor), penetration dial gauge 25mm travel x 0.01mm, datum bar assembly including two tripod and 1200mm long steel dial gauge holder and heavy duty steel carrying case. TECHNICAL SPECIFICATION Model Product BS 5006 Product Standard BS 1377, ASTM D1883, AASHTO T193 Weight 40kg read more

The Unitron is an affordable, fully automated load frame that allows control of compression rate as well as load regulation for load test such as One-Dimensional Consolidation. It can provide compression testing for several popular geotechnical tests that must have accurate control of the rate of displacement during loading - Incremental Consolidation, Constant . Rate of Strain Consolidation, Unconfined Compression and Triaxial. The advanced frame has 4 inputs with high resolution 24-bit ADC to resolve transducer signals to higher accuracy. The modularity of the device and our software allows quick reconfiguration to perform multiple tests and the test data is logged automatically. The system delivers the fastest results with significantly reduced effort in the lab. Additionally, built-in over range limits protects the device from damage and misuse. Technical Specification Model Number Unitron 10 Load Capacity Unitron 10kN Vertical Clearance 700mm Horizontal Clearance 210mm Travel Displacement 50mm PC Communication Ethernet Power 240VAC, 50Hz read more

The Flowtron Automatic Pressure Controllers are designed to control and measure pressure(and volume where applicable) inside a triaxial cell. The system is used in a multitude of geotechnical test such as triaxial UU, CU, Constant Rate of Strain, Permeability, modified Shearboxes and can be configured in many other test where pressure and volume regulation is required. The system provides a 7” Colour Touch Screen Interface with built-in features to calibrate and setup the device as well as monitoring measured and control parameter on board. Built-in over range limits protects the device from damage and misuse. Technical Specification Model Number                    Flowtron 2Mpa Pressure        Capacity  2Mpa Volume Capacity 200ml Power 240 VAC, 50Hz Test Standard ASTM 2580,D4767,DD7181,AASHTO T296,T267,BS1377-6,BS1377-7,BS1377-8, ISO/TS17892-9,AS1289.6.4.1,AS1289.6.4.2 read more

Our Unitron models are equipped with the load regulation system that allows performing stress controlled test such as One Dimensional Consolidation without the use of dead weight like the traditional frame. The stress is accurately applied using our advanced motor, sensor and electronics. This ability allows user to perform and monitor test remotely where each stages can be advanced by connecting to the system with a remote PC through internet. The user just have to key in parameters and the test is executed by the software and devices. TECHNICAL SPECIFICATION Laod Capacity               10kN, 50kN resolution 1N Displacement 10mm, 25mm, 50mm, with resolution 0.001mm Sample size 50mm other size upon request Test Standard BS EN ISO17892-5:2017, BS1377-5:1990, (Clause 3)  ASTM D2435-04,AS12896.6.1-1998 Power  240VAC, 50Hz   read more

BSGS Scientific one of the best products in the market is our modular, universal data logger that allows signal processing from various types of transducers (load cell, pressure transducer, LVDT, strain gauge, etc). This data logger unit is the best solution for laboratory that wanting to upgrade their analogue systems but do not have the budget to go full automation. The labs existing analogue system and machines can be maintained and they just need to upgrade by investing in transducers and GDAQ-PRO, the customers can run many types of common geotechnical test using our modular software. All data is recorded and the intervals and schedules are customisable according to the user needs. The 7 inch colour touch screen provides interface to calibrate and program internal amplifier for each channel individually as well as to view live data and charts. TECHNICAL SPECIFICATION Channel 16 Analogue channel 24 bit resolution Sampling Rate High Speed 500kHz Transducer Interface 5pin DIN Connector Storage Capacity External USB memory Stick PC Communication Ethernet, Network Communication Power  240VAC,50Hz   read more

Ideally suited for a wide range of applications, BSGS Scientific load cells provide high accuracy and minimum deformation. Various models are available, with the necessary adaptors, for use with BSGS Triaxial Load Frames, Marshall/CBR Test and Direct Shear Test machines. Technical Specifications     Model Standard BS 9016- WL series Capacities, tonne 0.1, 0.5, 1, 5, 8, 10, 20 …. 150 Sensitivity, Mv/v 1.5-2.0 ± 0.002 Non-Linearity, % FS ≤ 0.05 Output Resistance Ω 350 ± 3 Safe Overload % FS 150 Excitation, VDC 5-12 Material Alloy Steel read more

Used to obtain rock / concrete sample perfectly machined ( cube, prisms, etc) from irregular rock core pieces. It is supplied complete with a proper vice to hold irregular pieces firmly in place up 100x200mm approximately and longer cores can be machine also include cooling water inlet and transparent cover, conforming to CE requirements, with doors that are locked automatically when the machine is cutting. The machine does trimming while cutting, actions leaving, a smooth flat surface to comply with testing requirement. Cutting operations can be left unattended and the machine stops automatically when the operation is complete. The machine is supplied complete with a diamond Blade and water pump with tank. Technical Specifications     Model Number BS 6000 Input Voltage 380V/50hZ Feed Speed 0.1-15mm/m Spindle Speed 2200RPM Cut-Off Wheel ∅350 x 2.5 x 32mm Cutting Capacity Max ∅100mm Max Table Travel Distance 145mm ( only Y axis ) Input Power 3.3kw Cutting Motor 3kw Dimension 960mm x 855mm x 735mm Table Dimension 330mm x 280mm Net Weight 285kg read more

This apparatus uses for determination of the compacting factor of concretes with low, medium and high workability. Made from painted steel sheet. Composed of two hoppers with trap doors Mounted vertically above a cylindrical mould. Technical Specifications   Model Number BS 4001 Product Standard BS 1881 : 103/45057 Dimension 1300 (H) x 320 (W) x 350 (L) Weight 25kg         The Apparatus Comprises The Following Accessories :-   BS 4001-01 Tamping Rod – 16mm diameter x 600mm long with both end hemispherical BS 4001-02 Scoop – made of galvanized steel BS 4001-03 Metal Tray – 900 x 900 x 80mm height read more

Shrinkage Limit Set consists of a selection of items needed to perform shrinkage limit testing, per ASTM and AASHTO testing standards. ( ASTM D427, AASHTO T92, UNE 10014, NF XP94-060-1) Technical Specifications   Model Name BS 5030 Model Standard ASTM D427, AASHTO T92, UNE 10014, NF XP94-060-1 Weight Approx 2.5 kg Technical Specification   BS 5030-01 Shrinkage Dish 45mm (D)  x 12.7mm (H) Qty 2. BS 5030-02 Crystallising Dish 57mm (D) x 31mm deep BS 5030-03 Shrinkage prong plate. Manufactured from transparent acrylic and fitted with 3 metal prongs BS 5030-04 Evaporating Dish BS 5030-05 Graduated cylinder 25ml BS 5030-06 Spatula BS 5030-07 Plastic carrying case read more